How to Use Push-Button Start on Ford F-150?
With intelligent access technology now standard on Lariat, King Ranch, Platinum and Limited models, getting your F-150 running and on the road has never been easier. How to use the push-button start feature on your Ford F-150 depends on whether you’re sporting a gasoline or diesel engine under the hood.
Using Push-Button Start on a Gas Engine Ford F-150
Step 1: Press and hold the brake pedal
Step 2: Press the Engine Start/Stop button
Note: Your vehicle’s key fob must be on you for push-button start to work.
Using Push-Button Start on a Diesel-Equipped Ford F-150
If your F-150 is equipped with a diesel engine, it will require a little extra attention to start. Diesel engine vehicles come equipped with a set of instant start glow plugs, which offer quick start-ups in cold weather. Because the glow plugs must heat up before the engine can be started, there are a few extra steps involved.
Step 1: Press the Engine Start/Stop button
Step 2: Press and hold the brake pedal
Step 3: Wait for glow plug indicator to turn off
Note: A message in the instrument panel will instruct you to wait, along with an illuminated glow plug indicator in the instrument panel. Do not proceed until the glow plug indicator turns off. The time required for glow plugs to energize can vary depending on several factors, including coolant and environmental temperature and barometric pressure.
Step 4: Press the Engine Start/Stop button
Note: You should allow your engine to idle for at least 15 seconds after startup and wait until the oil pressure gauge reaches normal before driving.
Locking and Unlocking Doors with Intelligent Access
To unlock the doors on your F-150, simply pull on the door handle with the key fob in your pocket. To lock them back up, just press the sensor on the driver’s door handle for about half a second.
View Our New Ford F-150 Inventory
Can this be added to a F-150 that currently has a traditional key fob with remote start? Specially a 2018 XLT with the 302 package