How to Set Up the SecuriCode Keyless Entry Keypad on Your Ford Vehicle

By Product Expert | Posted in Technology on Monday, August 26th, 2019 at 9:20 pm
Ford SecuriCode system

How to Program Your Ford SecuriCode Keypad

Offered on select Ford models, the SecuriCode keypad provides convenient keyless access to your vehicle’s cabin. In this guide, we will walk you through how to use your Ford vehicle’s SecuriCode keypad to lock and unlock your doors, how to program your own personal entry code and some other neat tricks and tips.

[ Read More: How to Program Your Garage Door Opener with HomeLink

Each SecuriCode-equipped Ford model comes with a factory-set 5-digit entry code, which can be found in the owner’s wallet card in the glove box. You can also create up to five 5-digit personal entry codes. Note that your factory-set code will continue to work even once you have set your own personal code.

Programming (or Reprogramming) a Personal Entry Code

Step 1: Enter your vehicle’s factory-set code.

Step 2: Press 1•2

Step 3: Enter your desired personal 5-digit code.

Step 4: Press 1•2 on the keypad to save personal code 1.

Note: To program additional personal entry codes, repeat Steps 1-3 then press one of the following buttons at Step 4.

  • Press 3•4 for personal code 2
  • Press 5•6 for personal code 3
  • Press 7•8 for personal code 4
  • Press 9•0 for personal code 5

Locking and Unlocking Doors Using SecuriCode

Unlock Driver’s Door – Enter your vehicle’s factory-set 5-digit code or your personal code.

Unlock All Doors – Enter your vehicle’s factory-set code or your personal code, then press 3•4

Lock All Doors – With the driver door closed, press and hold 7•8 and 9•0 at the same time.

[ Read More: Which Ford SYNC System Do You Have? ]

Other SecuriCode Commands

Did you know? Your SecuriCode keypad is more than just a system for locking and unlocking your doors. By memorizing a few simple controls, you can use your keyless entry keypad to:

  • Recall your preferred seat and mirror settings
  • Arm and disarm the anti-theft alarm
  • Open the trunk

Press play on the how-to video below to start unlocking the full potential of your SecuriCode keyless entry keypad.


[ Read More: Troubleshooting Problems with Your Remote Start System ]

4 Responses to “How to Set Up the SecuriCode Keyless Entry Keypad on Your Ford Vehicle”

  1. Todd Ransom says:

    I lost my keycode card how can i obtain another card or change my entry code

  2. Dana says:

    I reprogrammed the entry door code and forgot what it was. What can I do now?

  3. Makesha Thomas says:

    I bought the truck one of family members mad knew it. Breaking in truck I changed I forgot it theft light stay on want stao

  4. Will says:

    You could get a second key and activate it by the 2 key fob technique. With this you can see the original code.

Leave a Reply